View B44066M6000E230_4859383.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Film capacitors - Capacitors for Power Factor Correction
Key components
Multi-measuring interface MMI6000 for BR6000 controller
Series/Type: MMI6000 Ordering code: B44066M6...E230 Date: Version: September 2007 1
Content of inside pages of data sheet. Data will be automatically entered into frontpage headlines, headers and footers. Please fill in the table and then change the colour to "White". This ensures that the table disappears for the customer pdf.
Identification/Classification 1: (header 1) Identification/Classification 2: (header 2) Ordering code: Series/Type: Preliminary data (optional): (if necessary) Department: Date: Film capacitors - Capacitors for Power Factor Correction Key components B44066M6...E230 MMI6000 Preliminary FK PC PM PFC September 2007
(c) EPCOS AG 2007. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited.
Film capacitors - Capacitors for Power Factor Correction Key components
B44066M6...E230 MMI6000
Characteristics Measuring device for electrical (real current) measurement Additional protection for PFC systems Two in one: * Accessory for PF-controller BR6000 series * Stand-alone measuring device Illuminated graphical display Small dimensions
Technical data and specifications
Types/Output Interface Display Supply and measurement voltage Power consumption Measurement current Output capacity Measuring temperature range Ambient temperature range Housing Dimensions Weight Protection category to DIN 40 050 MMI6000-R (1 standard relay) MMI6000-T (1 optocoupler) RS485 Graphical, 2 x 16 characters 230 V, 50/60 Hz < 4 VA X/5 A and X/1 A Standard relay: 250 V AC, 1000 W Optocoupler: 0 ... 100 C -10 ... +55 C Switchboard installation housing, DIN 43 700 100 x 100 x 50 mm 0.5 kg Front side: IP54 Rear side: IP20 60 V DC, 150 mA
FK PC PM PFC
Please read Cautions and warnings and Important notes at the end of this document.
September 2007 Page 2 of 5
Film capacitors - Capacitors for Power Factor Correction Key components
B44066M6...E230 MMI6000
Operation modes
Coupling MMI6000 - BR6000 Coupling MMI6000 - BR6000T DYNA-I-TRIGGER MMI - MODBUS RTU MMI - ASCII OUT
Measurement categories
Voltage, current Power factor Active power Reactive power Apparent power Frequency Temperature Energy
Languages Ordering Codes MMI6000-R MMI6000-T
German and English B44066M6000E230 B44066M6100E230
FK PC PM PFC
Please read Cautions and warnings and Important notes at the end of this document.
September 2007 Page 3 of 5
Film capacitors - Capacitors for Power Factor Correction Key components
B44066M6...E230 MMI6000
Cautions and warnings General * The MMI 6000 may only be used for the purpose it has been designed for. * The device has to be projected in such a way that in case of any failure no uncontrolled high current and voltages may occur. * The device in operation has to be protected against moisture and dust, sufficient cooling has to be assured. * Please note that the device is under high tension during operation. * The MMI 6000 may only be used indoor. It is not suitable for outdoor applications. * Voltages above the permitted voltage range may damage the device. Attention FAILURE TO FOLLOW CAUTIONS MAY RESULT, WORST CASE, IN PREMATURE FAILURES OR PHYSICAL INJURY. Note For detailed information about PFC capacitors and cautions, refer to the latest version of the EPCOS PFC Product Profile.
U Please read cautions information about PFC capacitors and cautions as well as installation and maintenance instructions in the actual
version of the Product Profile Power Factor Correction to ensure optimum performance and prevent products from failing, and in worst case, bursting and fire, etc. The actual Product Profile is available at www.epcos.com/publications. Information given in the PFC-product profile and values given in the data sheet reflect typical specifications. You are kindly requested to approve our product specifications or request our approval for your specification before ordering.
FK PC PM PFC
Please read Cautions and warnings and Important notes at the end of this document.
September 2007 Page 4 of 5
Important notes
The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. 2. We also point out that in individual cases, a malfunction of passive electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic component. 3. The warnings, cautions and product-specific notes must be observed. 4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as "hazardous"). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. 5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of
the "General Terms of Delivery for Products and Services in the Electrical Industry" published by the German Electrical and Electronics Industry Association (ZVEI). 7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks.
FK PC PM PFC Page 5 of 5
September 2007

▲Up To Search▲

Price & Availability of B44066M6000E230

	To Download B44066M6000E230 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .